Karcepts KFL02 Manuel d'utilisateur télécharger pdf (Page 3)

1. IABCTV Delete

The Intake Air Bypass Control Thermal Valve may interfere with the fuel pressure

regulator on our fuel line setup; so we need to delete it properly. The only

intention of the IABTCV is to promote quicker engine warm-up. We aren’t certain

of the need for Honda to implement the IABCTV as the K engine warms up just

like any normal engine; but whatever the case may be, once your K-Series

coolant reaches 160 degrees, this valve is no longer performing any operation

and is just getting in the way.

1. Remove the factory IABCTV and hoses.

2. Use Teflon tape or thread sealant (Permatex 56521 recommended) on the

threads of the provided Intake Air Bypass Control Thermal Valve Plug and install

into either the water neck (k20a and similar motors) or intake manifold (k24a

and similar motors).

3. Use the provided rubber cap and hose clamp to block off the air port nipple

atop the center of the intake manifold as shown.

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Karcepts KFL02 Manuel d'utilisateur Page 3