Installation Instructions for Part #: KFL01 & KFL02 Karcepts Clean & Simple K-Swap Fuel Line Kit for K-Series
5. FUEL LINE INSTALLATION (continued…) 5. Slide the remaining hose clamp over the shrink wrapped end of the return line. Locate the factory return
6. FINAL CHECKS/NOTES 1. Double check fuel line installation to verify all connections have been made securely. 2. Turn the fuel pump on. 3. Check
Disclaimer/Warranty: Due to the nature of high performance applications, Karcepts, Inc. products are sold without any warranty of merchantability or
Parts Included With K-Swap Fuel Line Kit DESCRIPTION QTY -6AN BANJO FITTING WITH CRUSH WASHERS 1 HIGH PRESSURE FEED LINE 1 -8AN TO -6AN SWIVEL ADA
1. IABCTV Delete The Intake Air Bypass Control Thermal Valve may interfere with the fuel pressure regulator on our fuel line setup; so we need to del
2. FUEL RAIL INSTALLATION 1. Remove the OEM K-Series fuel rail and replace with a Karcepts Fuel Rail (Karcepts P/N: KFR01, KFR02, or KFR03). Make c
3. FUEL FILTER & FPR SETUP 1. Remove the OEM fuel line from the chassis mounted fuel filter. Retain the OEM banjo bolt but discard the used cru
3. FUEL FILTER & FPR SETUP (continued…) 3. Support the AEM 25-302 Fuel Pressure Regulator in a vice and tighten the FPR gauge firmly and positio
4. FUEL PRESSURE REGULATOR INSTALLATION After all fittings have been tightened into the FPR, install it onto the right end of the Karcepts Fuel Rail.
5. FUEL LINE INSTALLATION 1. Connect the Karcepts supplied High Pressure Feed Line from the OEM fuel filter to the left side of the Karcepts Fuel Ra
5. FUEL LINE INSTALLATION (continued…) 3. For redundancy, below is a close up of the -8an to -6an swivel fitting which you want to make certain to p
Commentaires sur ces manuels